Unlike most processor boards the Gecko is designed to fit into something.
The Gecko fits into a standard Hammond 1455K1201 extruded aluminium enclosure.
This enclosure is rugged and reasonably priced.
One of the sides can be slid out for easy machining say for a display aperture or pushbuttons.
Use the standard end panels or Gecko IO "wings".
Wiring can be taken out the rear of the enclosure.
All electronics information and designs on this site is released
under the Creative Commons CC BY-SA and/or Open Hardware licences.
Copyright © 1973-2013 Rob Gray, All rights reserved.